Tom-N-Jerry’s Boats – Three Questions to Ask Yourself Before You get Boat Anti-Fouling Paint

Tom-N-Jerry’s Boats offers not only a huge selection of water crafts, motors, and boating accessories to all of its patients northwest Washington, it also employs a highly-trained staff of technicians and other experts ready to help repair your boat or boat motors, as well as perform preventative maintenance to avoid costly problems later. Tom-N-Jerry’s Boat Center also sells a wide range of preventative products, such as anti-fouling paint. Here are three questions you’ll like to come across when you’re looking for boat anti-fouling paint:

  • Are you painting over a sterndrive or an aluminum hull? The surface where you plan to apply the paint matters as much as the paint itself. You’ll want to use paint with zinc or copper thiocyanate biocides. Paints with cuprous oxide can’t be used on aluminum hulls because they will wash off.
  • Do you want bright colors? If color isn’t necessarily the way you want to show your boat off, you can get paints with different chemicals that protect the hull. If you want bright colors, Tom-N-Jerry’s Boats has a wide arrangement of many different paints that have copper thiocyanate biocide to spice up your boat without losing the paint.
  • Is your favorite boating spot full of slime? Sometimes slimy waters, especially near the shore, are par for the course. In this instance, you’ll need boat anti-fouling paint that with slime-reducing additives like zinc pyrithione.

Tom-N-Jerry’s Boats has a huge selection of anti-fouling boat paints to help you protect the surfaces of your hull and more available for competitive prices.

Advertisements

Tom-N-Jerrys Boats – Tips For Maintaining An Outboard Motor

Tom-N-Jerrys Boat Center sells a wide range of vessels from many manufacturers, including Hewescraft, Kingfisher, Yamaha and Honda. Many of their boats make use of outboard motors that need to be maintained properly if they are to perform to high standards. This can often be done by the boat owner, so consider all of the following tips to ensure your outboard motors stay in good shape.

Flush Out The Engine

The first thing that you should do when you get the boat home at the end of a sailing trip is flush the engine out so that you can get rid of any water that might cause issues. This is especially important if you have been boating on saltwater, as the salt may end up corroding the engine, leading to breakdowns and other problems. Make this a part of your regular routine when you return home.

Disconnect The Fuel Line

If you don’t intend to take the boat out again for a while, it is a good idea to disconnect the fuel line and give it a clean. Leaving it in place may lead to old fuel slowly going bad in the line, which results in it getting gummed up to the point where it struggles to provide the motor with the fuel it needs to get the boat moving again later on.

Wipe Down Accessible Parts

Tom-N-Jerrys Boats points out that all accessible parts should be wiped down with an anti-corrosive agent after each trip, as this will protect them from the rigors of your voyages while also ensuring that they don’t succumb to wear and tear when in storage.

Tom-N-Jerrys Boats – Tips For Docking A Boat

Tom-N-Jerrys Boat Center has experienced success in the industry for around forty years because the company has focused on offering information, as well as quality products and services, to their customers. They pay particular attention to helping those who are new to boating get to grips with the activity and recognize that docking is something that many people struggle with. The following tips should help anybody who wants to stay safe while they dock their boats.

Take It Slow

While you may have been able to let loose and really push your vessel when it was out on the water, trying to dock too quickly will lead to accidents happening. Slow your boat down to a crawl and focus on accuracy in steering. Don’t worry about those around you, instead keeping your focus on getting your boat where it needs to be.

Always Look Where You’re Going

Whether you have never docked a boat before or you have done it a hundred times, you should always keep an eye on your surroundings and look where you are going. If you get too complacent when docking, you may end up hitting stray mooring lines or colliding with other boats. Again, the need to focus should be emphasized, so keep your eyes and ears open.

Abort If It Goes Badly

Tom-N-Jerrys Boats notes that if your approach is going badly, there is no shame in aborting the attempt and trying again. It is much better to get it right at the second time of asking than to keep pushing forward with the first attempt to the point that you cause an accident.

Tom-N-Jerrys Boats – Useful Boat Maintenance Tips

While the team at Tom-N-Jerrys Boats is able to provide expert boat maintenance for a wide variety of different makes, they also understand the importance of boat owners doing what they can to ensure their vessels stay in good shape. There are a number of useful tips that people can keep in mind if they want to keep their vessels in great condition for longer, including all of the following.

Use Anti-Fouling Paint

A lot of new boat owners underestimate the importance of good anti-fouling paint when it comes to ensuring their ships’ hulls are kept in good condition. By applying fresh coats of paint regularly, you can decrease the accumulation of grime on the boat, which increases performance and fuel efficiency when you are out on the water.

Do Pre-Sailing Checks

Before you take your boat out onto the water, you should always take a little bit of time to conduct pre-sailing checks. Examine the body of the boat to see if there are any signs of wear or cracks that might affect you when you are out on the water. You should also test your instruments and radio regularly so that you are as safe as possible when sailing.

Wash The Boat

Tom-N-Jerrys Boats Center notes that it is important that you wash your boat regularly so that you can clean off any sediment and saltwater that could serve to corrode the exterior, which will cause issues later on. Use fresh water and dedicated boat soaps and cleaners to make sure the boat stays in great condition for longer.

Tom-N-Jerrys Boats – How To Create A Strong Business Plan

The current owner of Tom-N-Jerrys Boat Center has undergone extensive training to ensure that the company is able to provide quality service to clients, while also handling all of the financial and administrative issues that are related to business. This requires the creation of strong business plans, so consider all of the below tips if this is an area where you find that your company struggles.

Be Concise

While you should aim to make your business plan as informative as possible, you also need to understand when you are providing too much data. Packing your plan with useless information will only serve to obscure the main points that the plan should be focusing on, so make sure that all information serves a purpose in the context of the plan.

Consider The Competition

Every business plan should place some focus on the competition, regardless of whether you have just start out or have been in business for ten years. Look into what your competitors are offering to their customers and how this differs from what you are doing. Furthermore, you should also consider your own unique selling points and how they will help you to attract various revenue streams.

Check The Sums

Tom-N-Jerrys Boats owner understands the importance of accurate financial information if a business is going to experience long-term success. Your business plan will likely contain a lot of sums related to your budget, income streams and expenses. It is crucial that you check this figures multiple times to ensure that they are accurate.

Tom-N-Jerry’s Boats – Basic Things to Keep Your Outboard Running Strong

Every year, outboards advance in sophistication, but still require regular maintenance to keep them running at peak efficiency. The knowledgeable technicians at Tom-N-Jerry’s Boats have been servicing outboards for nearly forty years and know these basic things to help keep their client’s outboards running strong.

  • You need to check the gasket and latches of the cowl from time to time. The rubberized gasket around the base of the cowl works to seal out water.
  • Flush the engine with fresh water after each outing. This will help to flush away any salt that may have built up on the powerhead.
  • Periodically inspect and lubricate the throttle and shift. The points that connect the cables to the control box and engine need special attention.
  • Don’t use fuels that have more than ten percent ethanol.
  • If steering becomes sloppy, check the fluid level of the hydraulic steering system and bleed the lines.
  • Check the blades of your propeller on a regular basis. Dents, dings, or a slightly bent blade all impact the performance of the boat.
  • Change the lube in the gear case of the lower unit per the recommended service intervals. Be sure you are using the appropriate oil to avoid any problems.
  • Replace the water pump impeller and related parts according to your boats service schedule.

Many of these items can be easily taken care of on your own. For those items that are a little more complex, contact a reliable service provider like Tom-N-Jerry’s Boat Center in Mount Vernon, Washington.

Tom-N-Jerry’s Boats – Protecting Your Aluminum Boat from Salt Water Corrosion

The staff at Tom-N-Jerry’s Boat Center in Mount Vernon, Washington specialize in aluminum boats and know that they can sometimes get salt oxidation marks on them, which can quickly lead to galvanic corrosion. If you own an aluminum boat, there are several things you can do to help prevent your boat from becoming a victim of galvanized corrosion.

  • Don’t mix metals. If you are going to mix metals be sure to use metals that are close to each other in the galvanic series.
  • The bolts on your boat should be less active than fittings. Bolts are small so any loss of metal is more serious.
  • Do whatever you can to electrically isolate fittings from each other. This is important to do even on small craft.
  • Anodes should be securely fastened. Make sure that there is a firm contact with the metal that needs to be protected.
  • When it comes to anodes, you never want to paint them. The metal that it is fastened to also needs to be free of paint, scale, and dirt.
  • Never allow an impressed current voltage to exceed 1,300 millivolts when protecting aluminum.
  • Always repair any scratches and paint chips that expose bare metal.
  • Don’t use lubricants that contain graphite aboard a boat that is made from aluminum.
  • Wash down the boat with fresh water after every use to remove any salt that has built-up.

Protect your aluminum boat and equipment from the rigors of the marine environment. If you have questions or concerns regarding your aluminum boat, contact the knowledgeable staff at Tom-N-Jerrys Boats, specialists in aluminum boats.